6/12/2023 0 Comments Dayz standalone server![]() ![]() When you run it and don't pass any arguments, its graphical interface comes up, and one of the options is: See How do I create a 32-bit WINE prefix? You may want to create an use a wineprefix, especially if you need to run 32-bit Windows programs with Wine. (An X server does no good on the SSH server, which as you say has no display.) Wineprefixes That may still install plenty of libraries as dependencies, but far less, and no useless X server. Instead, install zenity with: sudo apt install -no-install-recommends zenity But I don't recommend installing zenity in the usual way, because that would pull in a huge amount of software as dependencies-basically, an entire graphical interface on the server that will be of no help to you. But if you want to use winetricks's own graphical interface-which I do recommend-then you'll need the zenity package. Winetricks, and the installers it automatically downloads and runs, are likely to work. If the SSH server is running a 64-bit Ubuntu system (highly likely) and you need to run 32-bit Windows programs, then you can enable the installation of 32-bit packages and install the wine32 package: sudo dpkg -add-architecture i386 I presume you have installed the wine package already, but for readers who have not: sudo apt update To test if Wine works in this situation, you can use wine notepad or wine explorer.Īlthough some libraries are required on the SSH server for this to work, the wine package has the x11-common package as a dependency, which is sufficient to provide them.xclock is provided in the x11-apps package. It's a good choice for testing X forwarding. xclock runs a simple graphical clock application.I suggest testing this with something simple, first: ssh -X from an SSH client that is running an X server is typically sufficient to solve that.įrom this point forward, all installation instructions are intended to be run on the SSH server. Various X servers for Windows are available, such as VcXsrv.Īs you've rightly said, the difficulties you've had so far are entirely due to the inability to run graphical programs. In particular, Windows does not come with one. Otherwise, an X server may or may not be available. If the SSH client is Ubuntu or another GNU/Linux system and a GUI is installed on it, then you probably don't have to install anything else on it. That is, you run a command in your SSH session that runs a graphical program, and the program window comes up on your desktop, even though the program itself is running on the SSH server. Then you can run graphical programs on the SSH server, and their graphical interfaces will be created on the SSH client. With ssh-server replaced by the actual hostname or IP address of the SSH server. If an X server is installed on the SSH client, you can run ssh -X ssh-server So long as the SSH client machine has a display and an X server (such as X.org) installed on it, it shouldn't be a problem that the SSH server doesn't have one. I presume the SSH client itself has a graphical interface. The SSH client is the machine you are using to connect to the server. To avoid ambiguity, I've referred to the server on which you wish to install DayZ Standalone Server as the "SSH server." In contrast, an "X server" is a program that runs on the SSH client. ![]() ![]() This answer assumes you are using-or can use- ssh to access the server.
0 Comments
Leave a Reply. |